NSE7_PBC-7.2 PRACTICAL INFORMATION, NSE7_PBC-7.2 TEST COLLECTION PDF

NSE7_PBC-7.2 Practical Information, NSE7_PBC-7.2 Test Collection Pdf

NSE7_PBC-7.2 Practical Information, NSE7_PBC-7.2 Test Collection Pdf

Blog Article

Tags: NSE7_PBC-7.2 Practical Information, NSE7_PBC-7.2 Test Collection Pdf, NSE7_PBC-7.2 Accurate Study Material, Reliable NSE7_PBC-7.2 Exam Prep, Online NSE7_PBC-7.2 Training

DOWNLOAD the newest ActualtestPDF NSE7_PBC-7.2 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=14Pj9o4JrWGLu49HCZskQqVQMw92u0Pmy

Do you often envy the colleagues around you can successfully move to a larger company to achieve the value of life? Are you often wondering why your classmate, who has scores similar to yours, can receive a large company offer after graduation and you are rejected? In fact, what you lack is not hard work nor luck, but NSE7_PBC-7.2 Guide question. If you do not have extraordinary wisdom, do not want to spend too much time on learning, but want to reach the pinnacle of life through NSE7_PBC-7.2 exam, then you must have NSE7_PBC-7.2 question torrent.

Fortinet NSE7_PBC-7.2 Certification Exam is a vendor-neutral certification that is recognized by many organizations around the world. Fortinet NSE 7 - Public Cloud Security 7.2 certification is highly respected in the IT industry and can help IT professionals advance their careers and increase their earning potential.

>> NSE7_PBC-7.2 Practical Information <<

NSE7_PBC-7.2 Test Collection Pdf - NSE7_PBC-7.2 Accurate Study Material

Passing the Fortinet NSE 7 - Public Cloud Security 7.2 (NSE7_PBC-7.2) exam can be a challenging task, especially if you have a tight schedule. You need comprehensive exam questions to prepare well for the exam. In this article, we will introduce you to ActualtestPDF Fortinet NSE7_PBC-7.2 Exam Questions that offer relevant and reliable exam materials for your Fortinet NSE 7 - Public Cloud Security 7.2 (NSE7_PBC-7.2) exam preparation.

Fortinet NSE 7 - Public Cloud Security 7.2 Sample Questions (Q36-Q41):

NEW QUESTION # 36
In an SD-WAN TGW Connect topology, which three initial steps are mandatory when routing traffic from a spoke VPC to a security VPC through a Transit Gateway? (Choose three.)

  • A. From the security VPC TGW subnet routing table: point 0.0.0.0/0 traffic to theFortiGate internal port
  • B. From both spoke VPCs and the security VPC, point 0.0.0.0/0 traffic to the Internet Gateway
  • C. From the security VPC TGW subnet routing table: point 0.0.0.0/0 traffic to the TGW
  • D. From the security VPC FortiGate internal subnet routing table, point 0.0.0.0/0 traffic to the TGW
  • E. From the spoke VPC internal routing table, point 0.0.0.0/0 traffic to the TGW

Answer: A,D,E

Explanation:
* Spoke VPC Routing: The 0.0.0.0/0 (default) route in the spoke VPC must point to the Transit Gateway attachment for traffic to reach other VPCs or external destinations.
* Security VPC Routing: Traffic from the security VPC needs to pass through the FortiGate for inspection and security controls. Therefore, the 0.0.0.0/0 route in the security VPC's TGW subnet routing table must point to the FortiGate's internal port.
* FortiGate Routing: The FortiGate's internal subnet must have its 0.0.0.0/0 route configured to point to the Transit Gateway attachment, allowing traffic to be returned to other VPCs or reach the internet.
In an SD-WAN TGW Connect topology, when routing traffic from a spoke VPC to a security VPC through a Transit Gateway, the mandatory initial steps include:
* From the spoke VPC internal routing table, point 0.0.0.0/0 traffic to the TGW (Option A):This step is crucial for ensuring that all traffic from the spoke VPC destined for external networks is directed through the Transit Gateway, allowing for centralized management and security inspection.
* From the security VPC TGW subnet routing table: point 0.0.0.0/0 traffic to the FortiGate internal port (Option B):Routing all traffic from the TGW subnet in the security VPC to the FortiGate's internal port ensures that traffic is subjected to the necessary security policies and inspections provided by the FortiGate appliance before it proceeds to other destinations or returns to the spoke VPCs.
* From the security VPC FortiGate internal subnet routing table, point 0.0.0.0/0 traffic to the TGW (Option D):This configuration ensures that traffic returning from the security processes handled by the FortiGate is routed back through the Transit Gateway, maintaining the integrity of the secure transit path and ensuring proper routing back to the originating spoke or onward to the internet.
References:These steps align with best practices for implementing SD-WAN solutions in a cloud environment, ensuring that all traffic is appropriately routed through security appliances for necessary controls and monitoring, asdetailed in the Fortinet SD-WAN documentation and AWS Transit Gateway connectivity guidelines.


NEW QUESTION # 37
Refer to the exhibit

You attempted to access the Linux1 EC2 instance directly from the internet using its public IP address in AWS.
However, your connection is not successful.
Given the network topology, what can be the issue?

  • A. The Transit Gateway BGP IP address is incorrect.
  • B. There is no internet gateway attached to the Spoke VPC A.
  • C. There is no elastic IP address attached to FortiGate in the Security VPC.
  • D. There is no connection between VPC A and VPC B.

Answer: B

Explanation:
Explanation
This is because the Linux1 EC2 instance is not accessible directly from the internet using its public IP address in AWS.
An internet gateway is a horizontally scaled, redundant, and highly available VPC component that allows communication between instances in your VPC and the internet. Without an internet gateway, the Linux1 EC2 instance cannotreceive or send traffic to or from the internet, even if it has a public IP address assigned to it.
To fix this issue, you need to attach an internet gateway to the Spoke VPC A and configure a route table that directs internet-bound traffic to the internet gateway. You also need to ensure that the Linux1 EC2 instance has a security group that allows inbound and outbound traffic on the desired ports.
[Internet Gateways - Amazon Virtual Private Cloud] : [Attach an Internet Gateway to Your VPC - Amazon Virtual Private Cloud] : [Security Groups for Your VPC - Amazon Virtual Private Cloud]


NEW QUESTION # 38
What kind of underlying mechanism does Transit Gateway Connect use to send traffic from the virtual private cloud (VPC) to the transit gateway?

  • A. A transport attachment
  • B. A GRE attachment
  • C. A BGP attachment
  • D. Transit Gateway Connect attachment

Answer: D

Explanation:
* Transit Gateway Connect Specificity: AWS Transit Gateway Connect is a specific feature designed to streamline the integration of SD-WAN appliances and third-party virtual appliances into your Transit Gateway.expand_more It utilizes a specialized attachment type.exclamation
* BGP's Role: While Transit Gateway Connect attachments leverage BGP for dynamic routing, BGP itself is a routing protocol and not the core connectivity mechanism in this context.
* GRE Tunneling: GRE is a tunneling protocol commonly used with Transit Gateway Connect attachments to encapsulate traffic.


NEW QUESTION # 39
Refer to the exhibit. You are deploying a FortiGate-VM in Microsoft Azure using the PAYG/On- demand licensing model. After you configure the FortiGate-VM, the validation process fails, displaying the error shown in the exhibit.

What caused the validation process to fail?

  • A. You selected the incorrect resource group.
  • B. You selected the PAYG/On-demand licensing model, but did not select correct virtual machine size.
  • C. You selected the Bring Your Own License (BYOL) licensing mode.
  • D. You selected the PAYG/On-demand licensing model, but did not associate a valid Azure subscription.

Answer: D


NEW QUESTION # 40
Refer to the exhibit

You are tasked to deploy a FortiGate VM with private and public subnets in Amazon Web Services (AWS).
You examined the variables.tf file.
What will be the final result after running the terraform init and terraform apply commands?

  • A. Terraform will not deploy a FortiGate VM
  • B. Terraform will deploy a FortiGate VM in the eu-West-1a region with two subnets and byol license.
  • C. Terraform will deploy a FortiGate VM in the eu-West-Ia region without any subnets.
  • D. Terraform will deploy a FortiGate VM in the eu-West-Ia region with private and public subnets.

Answer: D

Explanation:
The variables.tf file shows that the FortiGate VM will be deployed in the eu-West-Ia region with private and public subnets. The region variable is set to "eu-west-1" and the availability_zone variable is set to
"eu-west-1a". The vpc_id variable is set to "vpc-0e9d6a6f" and the subnets variable is set to a list of two subnet IDs: "subnet-0f9d6a6f" and "subnet-1f9d6a6f". The license_type variable is set to "on-demand" and the ami_id variable is set to "ami-0e9d6a6f".
References:
https://docs.fortinet.com/document/fortigate/6.4.0/aws-cookbook/236478/deploying-fortigate-vm-on-aws-using-t


NEW QUESTION # 41
......

As a market leader, our company is able to attract quality staffs, it actively seeks out those who are energetic, persistent, and professional to various NSE7_PBC-7.2 certificate and good communicator. And we strongly believe that the key of our company's success is its people, skills, knowledge and experience. The successful selection, development and NSE7_PBC-7.2 training of personnel are critical to our company's ability to provide a high standard of service to our customers and to respond their needs on our NSE7_PBC-7.2 exam questions.

NSE7_PBC-7.2 Test Collection Pdf: https://www.actualtestpdf.com/Fortinet/NSE7_PBC-7.2-practice-exam-dumps.html

DOWNLOAD the newest ActualtestPDF NSE7_PBC-7.2 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=14Pj9o4JrWGLu49HCZskQqVQMw92u0Pmy

Report this page